How To Set Up A Drawing In Autocad To Scale

View Original  X

How to resize or rescale an AutoCAD drawing

Past:

Support

Issue:

AutoCAD 2D drawings are normally drawn in model space at a one:1 calibration (full-size). In other words, a 12-foot wall is drawn at that size. The drawings are then plotted or printed at a plot "scale" that accurately resizes the model objects to fit on newspaper at a given scale such as i/8" = 1'. In some drawings, data in model infinite hasn't been fatigued at a 1:1 scale. Among the reasons are user errors, inaccurate scanning, and faulty exporting of data. Assuming everything in model infinite is uniformly at the wrong scale, it is possible to rescale or resize the drawing objects to total-size scale.

Another task would exist to rescale a drawing from one unit of measurement to another unit, like from inches to millimeters.

Solution:

Task i: Rescale a cartoon, using the same unit of measurement

Method 1

To scale objects (cartoon content) to Reference:

1. In the drawing that is not at 1:ane scale, observe an object or line whose length y'all know.
2. Start the scaling command withSC(orSCALE).
3. Make a pick for the objects that need to be included in the scaling operation.
4. Click in the drawing for theoutset point of the scaling base (base of operations point).
   1. TypeR to activateReferencescaling.
   2. Type a reference-length from one of the objects of the drawing by:
      • Either clicking in one case for its first point and second time for its point on the other cease (2nd point).
      • Or type the reference-length in number if its known.
   3. Complete thesecond betoken of the scaling base (cease point) by:
      • Either inbound the length value.
      • Or by clicking for the second signal with the mouse cursor.

Method ii

1. In the drawing that is not at 1:i scale, detect an object or line of known length.
2. Employ the DIST (Command) to check the altitude of the line or object in the cartoon. For example:
   • The known - and intended - length of an object is 200.0000 units.
   • The length as measured in the drawing is 273.5781.
3. With a estimator, carve up the intended length by the measured length.
   • In the previous example, the calculation yields the scale factor:200.0000 ÷ 273.5781 = 0.73105
4. Enter the SCALE (Command).
5. Select a base point, such equally0,0,0.
6. Enter the obtained scale factor to adjust all objects in the drawing model to their correct size.

Chore 2: Rescaling and converting a drawing to a different unit

1. How to alter or convert the units of a cartoon in AutoCAD

Products:

AutoCAD for Mac; AutoCAD LT for Mac; AutoCAD Products;

Post a question. Get an respond.

Get answers fast from Autodesk support staff and product experts in the forums.

Source: https://knowledge.autodesk.com/support/autocad/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-resize-or-rescale-an-AutoCAD-drawing.html

Posted by: watsonbuttly.blogspot.com

Share this post